Very simple steps to set up your Hitch and
required components for your Quik-Latch system.
Welcome to Third Wheel Trailers Inc.
As follows are some photos which display the system we've designed for the Cruiser Motorcycle,
such as the Harleys, BMW, Goldwings and all the Bikes on which the sport system does not work.
This system is very simple and easy to install, and as a result, easy to latch up and release
while hooking up the Trailer.
First step is, if your Bike already has a hitch with a ball for example, simply remove the ball
from the hitch and replace it with the Third Wheel quick latch system as you see in the first photo
displayed.
Welcome to Third Wheel Trailers Inc.
Next, simply take the outer adapter plate which is mounted to the Trailers' tongue, and slide it
in to place.
The Quick Latch system that is now installed to the hitch of your Motorcycle, is spring loaded
has a locking device in it which as you slide the outer adapter plate onto it, it will instantly lock in to
place.
Once the latch has clicked in, you simple take the safety pin (which is attached to the
trailers' tongue via a small chain) and slide it through both components. This locks together, both the inner
bracket ant the outer latch plate with the secondary lock, leaving no room for it to come undone, giving the
rider peace of mind while riding.
Welcome to Third Wheel Trailers Inc.
To unlatch the Trailer, simple pull the safety pin, and as you grab the tongue of the trailer to
lift it out, you pull back to unlock and latch lever, and pull the Trailer away from the Bike.
This system will allow the rider to hook the trailer up in less then a minute, and to detache it
just the same. Quick, simple but effective, is how Third Wheel Trailers designs and builds its
products.
Uni Go Trailers Makes an excellent demo of towing
a trailer